3/14/2024 0 Comments Atv loading ramp kitNote how the 2×12 board is deflecting under the weight of the Prairie and rider (830 lbs!) If you get this much deflection with a 2×12, imagine how much you would get with just a 2×8! Also note how little the aluminum ramp deflects. Why? Because 2×8’s just don’t have the strength to carry an ATV AND a rider safely during loading. If you go this route we recommend NOT using a 2×8 for any ATV/rider combo that would gross over 600lbs. You can also build a ramp with a ramp kit consisting of a metal end t hat accepts a 2×8 or 2×12 wood plank. However the rung-style loading ramp provides greater traction to an ATV tire if the ramp angle is steep or the conditions are wet. The smaller lawnmower tires fall into the space between the rungs and create a bumpy load and unload. If you plan on loading something like a riding lawnmower besides your ATV, then go with mesh. There are two basic construction types for these ramps, diamond mesh and rungs. SYT (sweet young thing) then consider a 1500 lb. Choose a ramp with a load rating of at least 1000lbs.If you have a heavy-weight 4×4 and ride the ATV up the ramp and you don’t happen to be a 5ft.2in. All commercial loading ramps are load rated. We have found the aluminum tri-folds are the easiest to handle. Most styles are either bi-fold or tri-fold. Metal loading ramps generally can be found in two materials, steel and aluminum. So, if you are going to ride your ATV up a ramp you should know how to do it safely! And, we know of people who have been injured and even killed by using a loading ramp improperly. We also know you ride your ATV’s up loading ramps. OK… With the obligatory warnings out of the way… We know if you are not lucky enough to live next to a riding area or have a trailer, then you most likely transport your ATV with a truck and you use a loading ramp (unless you lift it in by yourself!).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |